19
EN
Preparing the remote control
Loading the batteries
1
Remove the cover.
2
Insert the batteries.
3
Close the cover.
¶
Insert two AA-size (R6) batteries as indicated by the polar-
ity markings.
Remote control operation
When the
STANDBY
indicator is lit, the power turns ON when you press
the
POWER RCVR
on the remote control. When the power comes ON,
press the key you want to operate.
¶
When pressing more than one remote control key successively,
press the keys securely by leaving an interval of 1 second or more
between keys.
Notes
1. The supplied batteries may have shorter lives than ordinary batteries
due to use during operation checks.
2. When the remote-controllable distance gets shorter than before,
replace both batteries with new ones.
3. Placing the remote sensor in direct sunlight, or in direct light from a
high frequency fluorescent lamp may cause a malfunction.
In such a case, change the location of the system installation to
prevent malfunction.
Operating other
component range
Remote sensor
POWER RCVR
Setting up the system
*5462/08-19/EN
04.4.13, 8:01 PM
19
