Kenwood UBZ-LH68, Инструкция по эксплуатации

Страница: 22 / 36

16
Channel Scan automatically finds a channel where a call
is received. If you program a CTCSS number {page 13},
it finds only a channel where a call with the matching
CTCSS number is received. 2 seconds after the signal
drops out, Channel Scan resumes monitoring the
channels.
Note:
◆
This transceiver does not require an optional SMC-34 Mic to use
Channel Scan. However, you can also use this optional microphone
to start or stop Channel Scan {page 28}. If using the SMC-34 Mic,
you need not manually enable Channel Scan using Menu Set-up
{page 17}.
◆
The APO timer {page 25} does not count while scanning.
CHANNEL SCAN