Kenwood TS-590SG, Руководство по обслуживанию

Страница: 3 / 155

TS-590SG
3
Removing the torque changeover lever
(G02-1858-03)
1. Insert the tip of a fl at-head screwdriver (or other imple-
ment) under the tab of the torque changeover lever, then
lift the tab using the tip of the fl at-head screwdriver. (
a
)
Caution: Be careful not to damage the panel when lift-
ing it.
2. Turn the lever section of the torque changeover lever to
the right, as in the position described in step 1. (
b
)
:
@
3. Lift the torque changeover lever and remove it from the
panel. (
c
)
.
Mounting the torque changeover lever
(G02-1858-03)
1. Insert the torque changeover lever by aligning the three
tabs of the panel. ( a )
:
2. Slightly turn the lever section of the torque changeover
lever to the left ( c ) while pressing the surface near the
tab at the lower right of the torque changeover lever (
b
).
Caution: Confirm that the torque changeover lever is
caught by the lower right tab of the panel.
3. Turn the lever section of the torque changeover lever to
the left (
e
) while pressing the surface near the tab at
the upper right of the torque changeover lever ( d ), then
mount it onto the panel.
.
=
@
;
DISASSEMBLY FOR REPAIR