manualshive.com logo in svg

Kenwood TM-D710A, Инструкция по эксплуатации, Страница: 25 / 72

Поделиться
Скачать
Kenwood TM-D710A Скачать руководство пользователя страница 25

DTMF-2

■

  Transmitting Stored DTMF Codes

1

  Press and hold the microphone 

[PTT]

.

2

  While transmitting, press the 

Tuning

 control.

•  The last called DTMF Memory channel name and 

number appear on the display.  If no name has been 
saved for the channel, the DTMF code appears.

3

  While still transmitting, rotate the 

Tuning

 control to 

select your desired DTMF Memory channel, then 
press the 

Tuning

 control to set the channel.

•  Additionally, you can press a DTMF key 

corresponding to your desired channel (

[0]

 ~ 

[9]

) to 

select the channel and begin transmission.

•  The stored DTMF code scrolls across the display and 

is transmitted.

•  The code will be transmitted even if you release 

[PTT]

 

before the entire code has scrolled across the display.

•  If no DTMF code is stored in the selected channel, the 

frequency display is restored.

■

  Selecting a Transmit Speed

  

Some repeaters may not respond correctly if a DTMF 
code is transmitted at fast speed.  If this happens, 
change the DTMF code transmission speed from FAST 
(default) to SLOW.

1

  Enter Menu mode and access Menu 302.

2

  Set the speed to FAST or SLOW.

■

  Selecting a Pause Duration

  

You can change the pause duration stored in DTMF 
Memory channels; the default is 500 msec. 

1

  Enter Menu mode and access Menu 303.

2

  Select a speed (in msec) from the available list: 100/ 

250/ 500/ 750/ 1000/ 1500/ 2000.

DTMF KEY LOCK

This function will lock the DTMF transmission keys so that 
they will not transmit if they are accidentally pressed.  To 
lock the DTMF keys, turn this function ON.

1

  Enter Menu mode and access Menu 304.

2

  Set the key lock to ON or OFF.

Содержание TM-D710A









































































Отзывы:

Нет отзывов