Kenwood TM-271 Скачать руководство пользователя страница 33

Страница: 33 / 80

Note:

◆

Pressing

[PTT]

causes the “

” icon to quit blinking.

◆

ASC can be activated while operating in Simplex Mode. However,
it does not change the Transmission/Reception frequencies.

◆

ASC does not function while scanning.

◆

Activating ASC while using Reverse switches Reverse OFF.

◆

If you recall a Memory Channel or the Call Channel that contains
a Reverse ON status, ASC is switched OFF.

◆

ASC causes received audio to be momentarily intermitted every
3 seconds.

TONE FREQUENCY ID SCAN

This function scans through all tone frequencies to identify
the incoming tone frequency on a received signal. You
can use this function to determine which tone frequency is
required by accessing your local repeater.

Press

[F]

[MENU]

and turn the

Tuning

control to

select Menu No. 2 (T).

Press

[MENU] (1s)

to start the Tone Frequency ID

Scan.

• When the transceiver receives a signal, scan starts.

The decimal point blinks during scan.

• While the transceiver is receiving a signal during Tone

Frequency ID Scan, the signal is emitted from the
speaker.

• To reverse the scan direction, turn the

Tuning

control.

• To quit the function, press any key.

• When the tone frequency is identified, a beep sounds

and the identified frequency blinks.

Press

[MENU]

to program the identified tone

frequency in place of the current tone frequency or
press any other key to exit the Tone Frequency ID
Scan.

• Turn the

Tuning

control while the identified tone

frequency is blinking to resume scanning.

Press any key other than

[MENU]

to exit Menu Mode.

Note:

◆

Some repeaters do not re-transmit the access tone in the

download signal. In this case, check the other station’s uplink
signal to detect the repeater access tone.

◆

The transceiver continues to check the Weather Alert Channel

and Priority Channel during Tone Frequency ID Scan.

Содержание TM-271

















































































Результаты поиска

Содержание TM-271

Отзывы:

Бренды по названию

Популярные бренды

Kenwood TM-271, Инструкция по эксплуатации

Результаты поиска

Содержание TM-271

Отзывы:

Бренды по названию

Популярные бренды