Kenwood TKR-D810, Руководство по обслуживанию

Страница: 3 / 3

TKR-D810
3
SYSTEM SET-UP
REALIGNMENT
1. Modes
User mode
PC mode
Firmware programming mode
PC programming mode
PC test mode PC tuning mode
Mode Function
User mode Use this mode for normal operation.
PC mode
Use this mode to make various settings by
means of the FPU through the RS-232C
port.
PC programming
mode Use to read and write frequency data and
other features to and from the repeater.
PC test mode
Use to check the repeater using the PC.
This feature is included in the FPU.
Firmware program-
ming mode Use when changing the fi rmware program
of the fl ash memory.
2. How to Enter Each Mode
Mode Operation
User mode Power on.
PC mode Received commands from PC.
Firmware programming mode [PF1] + Power on (one second)
3. PC Mode
3-1. Preface
The repeater is programmed by using a personal com-
puter, programming interface (KPG-46A/46U) and FPU (pro-
gramming software).
The programming software can be used with a PC. Fig-
ure 1 shows the setup of a PC for programming.
3-2. Connection Procedure
1. Connect the repeater to the computer using the interface
cable.
Note:
• You must install the KPG-46U driver in the computer to
use the USB programming interface cable (KPG-46U).
2. When power is applied, the user mode is entered im-
mediately. When the PC sends a command, the repeater
enters the PC mode and displays “PC” on the 7-segment
LED. When data is being transmitted to the PC from the
repeater, the TX LED lights. The BUSY LED lights when
data from the PC is being received by the repeater.
Note:
• The data stored in the personal computer must match
the model type, when it is written into the fl ash memory.
Merchandise received
Choose the type of transceiver
See page 3.
A personal computer, programming interface (KPG-46A/46U), and
programming software (KPG-174D) are required for programming.
DC power supply or
duplexer?
Repeater programming & setup
Installation in the optional space
YES
NO
Delivery
(Option)
Frequency range RF power Type
TX/RX 400~470MHz 40W E
External speaker?
KES-5 installation
YES
NO
(Option)
See page 6.
See page 6.