Kenwood TK-8180K, Инструкция по эксплуатации

Страница: 5 / 7

KENWOOD CORPORATION
TK-7180-K FCC ID:K4437303110/IC:282F-37303110
TK-8180-K FCC ID:K4437313110
LCD Display
No. Name Description
1 Dot Matrix(12digits) Alphanumeric display Channel/GID display Zone display
2 Dot Matrix(3digits) Channel/GID display Zone display OST list number display
3 Signal strength indicator
4 Monitor on display
5 Talk around display
6 Scan display
7 Message stack display
8 Priority channel 1/2 display
9 Telephone ID display
10 Horn alert display
11 Option board display
12 Public address display
13 Zone add display
14 Auto Recording Display on VGS-1 option
15 Auto Reply Message Display on VGS-1 option
16 CH/GID add display
17 AUX A display
18 AUX B display
19 OST display
TX/BUSY INDICATION
No. Name Description
1 Red TX display
2 Green Busy display
3 Orange Call display
OPERATING BASICS
ATING
♦
Switching Power ON/OFF
Press the switch to switch the transceiver ON.
Press and hold the switch for approximately 1 second to switch the transceiver OFF.
♦
Adjusting the Volume
The Volume Up/Down SW control to adjust the volume. You can adjust the volume up sw to increases the volume and
the volume down sw to decreases it.
♦ Selecting a Channel
The Channel Up/Down SW to select a channel.
The channel up sw the channel number increases and The channel down sw decreases it.
♦ Transmitting
Note : Before transmitting, first monitor the channel to make sure it is not already in use.
1 Select your desired channel.
• If the channel is busy, wait until it becomes free.
1 Press the microphone PTT switch and speak into the microphone. Release
the PTT switch when you have finished speaking.
• For best sound quality at the receiving station, hold the microphone approximately 1.5 inches (3~4cm) from
your mouth.