6
SCAN
Scan monitors for signals on the transceiver channels. While scanning, the
transceiver checks for a signal on each channel and only stops if a signal is
present.
To start/stop scanning, press the key programmed as
Scan On/Off
.
• “Sc” appears on the display during Scan.
• When a signal is detected, Scan pauses at that channel. The transceiver will remain on
the busy channel until the signal is no longer present, at which time Scan resumes.
Note:
To use Scan, there must be at least 2 channels added to the scanning sequence.
p
riority
S
cAn
If a Priority channel has been programmed, the transceiver will automatically
change to the Priority channel when a call is received on that channel, even if call
is being received on a normal channel.
• “P” appears on the display during Priority Scan.
t
emporAry
c
hAnnel
l
ockout
During scan, you can temporarily remove specific channels from the scanning
sequence by pressing the key programmed as
Scan Delete/Add
while Scan is
paused at the undesired channel. To temporarily remove a zone, press and hold
Scan Delete/Add
while Scan is paused at a channel in the undesired zone.
• The channel/zone is no longer scanned. However, when scanning is ended and
restarted, the Scan settings return to normal.
S
cAn
d
elete
/A
dd
You can add and remove zones and/or channels to and from your scan list.
1
Select your desired zone and/or channel.
2
Press the key programmed as
Scan Delete/Add
to remove a channel or press
and hold the key for approximately second to remove a zone.
S
cAn
r
eVert
The Scan Revert channel is the channel selected when you press the
PTT
switch
to transmit during scan. Your dealer can program one of the following types of
Scan Revert channels:
•
Selected:
The last channel selected before scan.
•
Se Talkback:
Same as “Selected”, plus you can respond to calls on the
channel at which scan is paused.
•
Priority:
The Priority channel.
•
Pr Talkback:
Same as “Priority”, plus you can respond to calls on the channel
at which scan is paused.
•
Last Selected:
The last channel on which you receive a call.
Содержание TK-7302H
Страница 17: ......
