15
TK-690H
(
B
)
OPERATING FEATURES
All clone/Group clone selection
[PF5] + Power on
All clone mode
Group clone mode
[Up/Down]
[PF5]
Master group selection
[Up/Down]
[UP/Down]
[PF5]
Slave group selection
Cloning
END
Power off
[PF5]
[PF5]
[PF5]
44. Clone Modes
There are two clone modes : “All Clone Mode”, in which
all data programmed in one transceiver with the “FPU” is
copied to another transceiver, and “Group Clone Mode”, in
which group data in one transceiver is copied to a group in
another transceiver.
The cloning operation is performed from the master side
transceiver.
Cloning cable
(Part No. E30-3370-05)
Fig. 2
A CLONE / ALL CLONE
Master side display
TX LED on
TX LED off
END
Slave side display
– PC –
Busy LED on
Busy LED off
User mode
Data cloning
[PF5]
44-1. To Enter the Clone Mode and Connect
Transceivers
(1) Hold down the [PF5] key and turn on the power switch on
the master side transceiver.
Turn on the power switch on the slave side transceiver as
usual.
(2) Connect the master and slave side transceivers with a
cloning cable.
44-2. All Clone
1. Enter the All Clone Mode from the clone mode with the
[Up/down] knob.
2. Press the [PF5] key to start cloning.
44-3. Group Clone
1. Enter the group clone mode from the clone mode with
[Up/Down] knob.
2. Press the [PF5] key to enter the master group select
mode. Select the master group with [Up/Down] knob.
3. Press the [PF5] key to enter the slave group select mode.
Select the slave group with [Up/Down] knob.
4. Press the [PF5] key to start cloning.
Note :
The transceiver does not enter the clone mode if it is
disabled with the FPU. To clone the transceiver both trans-
ceivers must be same. If the panels, frequency ranges, op-
tional board are different, they cannot be cloned.
Master side display
TX LED on
TX LED off
END
Slave side display
– PC –
G CLONE / GROUP CLONE
GRP 1M / GROUP 1M
GRP 160M / GROUP 160M
GRP 1S / GROUP 1S
GRP 100S / GROUP 100S
User mode
Busy LED on
Busy LED off
User mode
Data cloning
[PF5]
[Up/Down]
[Up/Down]
[PF5]
[PF5]
Содержание TK-690B
Страница 78: ...TK 690H B TK 690H B 97 WIRING ...
Страница 79: ...TK 690H B TK 690H B 100 BLOCK DIAGRAM ...