Kenwood TK-5720 Скачать руководство пользователя страница 25

Страница: 25 / 28

BACKGROUND OPERATIONS

Your dealer can activate a variety of transceiver functions to perform without any

additional operation on your part.

ime

ouT

imer

(ToT)

The Time-out Timer is used to prevent you from using a channel for an extended

duration. If you continuously transmit for a preset time, the transceiver will stop

transmitting and an alert tone will sound. Release the microphone

PTT

switch.

ignAl

TrengTh

ndicATor

The signal strength indicator displays the strength of received calls.

Strong

Sufficient

Weak

Very weak

No icon appears when no signal is available

ompAnder

If programmed by your dealer for a channel, the compander will remove

excessive noise from transmitted signals, to provide higher clarity of signals.

uSy

hAnnel

ockouT

(bcl)

If BCL is set up by your dealer, you will be unable to transmit if the channel is

already in use. Use a different channel or wait until the channel becomes free.
If BCL Override has been programmed, you can transmit over the current signal:

Press and hold the microphone

PTT

switch.

• If the channel is already in use, a warning tone will sound.

Quickly release and then press the

PTT

switch again.

Speak into the transceiver as you would during a normal call.

pTT id

PTT ID is the transceiver unique ID code which is sent each time the microphone

PTT

switch is pressed and/or released.

Note:

PTT ID can be made only in analog operation.

Содержание TK-5720





























Результаты поиска

Содержание TK-5720

Отзывы:

Похожие инструкции для TK-5720

Бренды по названию

Популярные бренды

Kenwood TK-5720, Руководство пользователя

Результаты поиска

Содержание TK-5720

Отзывы:

Похожие инструкции для TK-5720

Бренды по названию

Популярные бренды