TK-3202L
2
Merchandise received
License and frequency allocated by FCC
Choose the type of transceiver
Transceiver programming
A personal computer (IBM PC or compatible), programming
interface (KPG-22/22A), USB adapter (KCT-53U), and programming
software (KPG-87D) are required for programming.
(The frequency, TX power HI/LOW, and signaling data are programmed
for the transceiver.)
Delivery
Are you using the speaker microphone?
YES
NO
KMC-17 or KMC-21
Speaker microphone
(Option)
(Option)
Are you using the optional antenna?
YES
NO
KRA-23 or KRA-27
Optional antenna
TX/RX 450~490
TX/RX 470~512
TX/RX 400~430
4.0W
4.0W
4.0W
TK-3202L (K,M)
TK-3202L (K2,M2)
TK-3202L (K3)
Frequency range (MHz)
RF power
Type
GENERAL / SYSTEM SET-UP
INTRODUCTION
SCOPE OF THIS MANUAL
This manual is intended for use by experienced technicians
familiar with similar types of commercial grade communications
equipment. It contains all required service information for the
equipment and is current as of the publication date. Changes
which may occur after publication are covered by either Service
Bulletins or Manual Revisions. These are issued as required.
ORDERING REPLACEMENT PARTS
When ordering replacement parts or equipment information,
the full part identification number should be included. This
applies to all parts, components, kits, or chassis. If the part
number is not known, include the chassis or kit number of
which it is a part, and a sufficient description of the required
component for proper identification.
PERSONAL SAFETY
The following precautions are recommended for personal
safety:
●
DO NOT transmit until all RF connectors are verified secure
and any open connectors are properly terminated.
●
SHUT OFF and DO NOT operate this equipment near
electrical blasting caps or in an explosive atmosphere.
●
This equipment should be serviced by a qualified technician
only.
SERVICE
This transceiver is designed for easy servicing. Refer to
the schematic diagrams, printed circuit board views, and
alignment procedures contained within.
SYSTEM SET-UP
Unit
Model
TX-RX Unit
Frequency range
Remarks
& destination
TK-3202L K,M X57-6890-26
450~490MHz
TK-3202L K2,M2 X57-6890-27
470~512MHz
IF1 : 38.85MHz
TK-3202L
K3
X57-6890-28
400~430MHz
LOC : 38.4MHz