TK-3102G
5
DISASSEMBLY FOR REPAIR
■
Removing the case assembly from the chassis
1. Remove the two knobs
q
, cushion
w
and three round
nuts
e
.
2. Remove the two screws
r
.
3. Expand the right and left sides of the bottom of the case
assembly, then Iift and remove the chassis from the case
assembly
t
.
:
@
.
.
.
:
;
;
=
4. Taking care not to cut the speaker lead
y
, open the
chassis and case assembly.
B
■
Removing the TX-RX unit from the chassis
1. Remove the eleven screws
u
.
2. Remove the VOL/CH FPC from the TX-RX unit connector
(CN400)
i
.
3. Remove the solder from the antenna terminal using a
soldering iron, then lift the unit off
o
.
4. Remove the waterproof packing
!0
and cushion
!1
from
the antenna connector.
Note:
The cushion cannot be reused. Affi x a new cush-
ion when you remove the cushion.
5. Remove the two screws
!2
and remove the antenna con-
nector.
Note:
When reassembling the unit in the chassis, be
sure to solder the antenna terminal.
CN400
Antenna
terminal
>
>
> >
>
>
>
2
8
>
>
■
Removing the lever
1. Press down the lever on the lower case
!3
, insert a small
fl at-head screwdriver into the space between the case
and lever, open the case carefully
!4
and lift the lever off.
Note:
Do not force to remove the lever from the case.
Case assembly
Lever knob
