New Product Information
Kenwood Electronics Belgium N.V.
6. TECHNICAL SPECIFICATIONS
General Specifications
TK-2360E
TK-3360E
Frequency Range
136 ~ 174 MHz
400 ~ 470 MHz
Number of Channels
Max. 16
Channel Spacing
12.5 kHz | 20 kHz | 25 kHz
Antenna Impedance
50 Ohm
Operating Voltage
7.5 V DC ± 20%
Battery Life (5-5-90)
–
Battery Save OFF
with KNB-55L | KNB-56N
± 9 hours
with KNB-57L
± 13 hours
Operating Temperature Range
-30 °C ~ +60 °C
Frequency Stability
± 2.5 ppm (-30 °C ~ +60 °C)
Dimensions (W x H x D) with KNB-55L
56 x 103.7 x 29.1 mm
– Projections not included –
Weight (net) with KNB-55L
260 g
Applicable Standards
EN 300 086, EN 300 113, EN 300 219, EN 301 489
EN 60065, EN60950-1, EN 60215
IP54, IP55, MIL-STD 810 C | D | E | F
Receiver Specifications
TK-2360E
TK-3360E
Sensitivity
EIA 12 dB SINAD
0.25 µV | 0.25 µV | 0.28 µV
EN 20 dB SINAD
-3 dB µV | -3 dB µV | -2 dB µV
Adjacent Channel Selectivity
70 dB | 70 dB | 63 dB
Intermodulation
68 dB
Spurious Response Rejection
70 dB
Audio Output (8 Ohm impedance)
500 mW with less than 5% distortion
Transmitter Specifications
TK-2360E
TK-3360E
RF Power Output
1 - 5 W
Modulation Limiting (Analogue)
± 5.0 kHz at 25 kHz
± 4.0 kHz at 20 kHz
± 2.5 kHz at 12.5 kHz
Spurious Emission
-36 dBm
≤
1 GHz
-30 dBm > 1 GHz
FM Noise (EIA) – 25 kHz | 20 kHz | 12.5 kHz
45 dB | 43 dB | 40 dB
Modulation Distortion
Less than 3%
Modulation
16K0F3E, 14K0F3E, 14K0F2D, 12K0F2D, 8K50F3E, 7K50F2D
Measurements made per EN Standards.
Specifications shown are typical. Radios meet applicable regulatory requirements.
Kenwood follows a policy of continuous advancement in development.
For this reasons, specifications may be changed without notice.
