TK-2302-1, TK-2302V-1 FCC ID:ALH413500 IC:282D-413500
TK-3302-1, TK-3302U-1 FCC ID:ALH413600 IC:282D-413600
Installing/ Removing the Optional Battery Pack
PREPARATION
The battery pack is not charged at the factory; charge it before use.
CAUTION:
**
DO NOT RECHARGE THE BATTERY PACK IF IT IS ALREADY FULLY CHARGED. DOING SO MAY CAUSE THE LIFE OF
THE BATTERY PACK TO SHORTEN OR THE BATTERY PACK MAY BE DAMAGED.
** AFTER RECHARGING THE BATTERY PACK, DISCONNECT IT FROM THE CHARGER. IF THE CHARGER POWER IS
RESET (TURNED ON AFTER BEING TURNED OFF), RECHARGING WILL START AGAIN AND THE BATTERY PACK WILL
BECOME OVERCHARGED.
**
DO NOT SHORT THE BATTERY TERMINALS OR DISPOSE OF THE BATTERY BY FIRE.
** NEVER ATTEMPT TO REMOVE THE CASING FROM THE BATTERY PACK.
1
Match the guides of the battery pack with the corresponding grooves on the upper rear of the transceiver, then firmly press the battery
pack t
2
To remove the battery pack, lift the safety catch, press the release latch, then pull the battery pack away from the transceiver.