BASIC OPERATIONS
Your dealer can program your transceiver with Conventional
Group, Voting, Voting with Signaling, or Free Channel Call.
TRANSMITTING
1
Turn the
Power switch/ Volume control
clockwise to
switch the transceiver power ON.
• A beep sounds if enabled by your dealer.
2
Rotate the
Channel selector
to select your desired
channel.
• In Voting, Voting with Signaling, and Free Channel Call, the
channel is selected automatically.
3
In Conventional groups, press the key programmed as
Monitor
or
Squelch Off
to check whether or not the
channel is free.
• If the channel is busy, wait until it becomes free.
4
Press the
PTT
switch and speak into the microphone.
Release the
PTT
switch to receive.
• For best sound quality at the receiving station, hold the
microphone approximately 3 ~ cm (.5 inches) from your
mouth.
• In Voting and Voting with Signaling, the transceiver will search
for the closest repeater and transmit using that repeater’s
frequency.
• In Free Channel Call, the transceiver will search for a free
channel and will begin transmitting on that channel.
Note:
When the battery pack voltage becomes too low, transmission
will stop and an alert tone will sound.
