Kenwood TK-2212, Инструкция по эксплуатации

Страница: 22 / 44

14
S
ELECTING A
Z
ONE AND
C
HANNEL
Select the desired zone using the selector or the keys
programmed as
Zone Up / Zone Down .
• The default setting for the selector is Zone Up/ Down .
Select the desired channel using the selector or the keys
programmed as
Channel Up / Channel Down .
• The default setting for the <B key is Channel Down .
• The default setting for the C> key is Channel Up .
Names can be programmed for channels with up to
8 characters each. The transceiver will display either the
channel name or the zone and channel number. Press the
key programmed as
Display Character to toggle between the
two displays.
T
RANSMITTING
1 Select your desired zone and channel using the selector
and the
Zone or Channel keys.
2 Press the key programmed as Monitor or Squelch Off to
check whether or not the channel is free.
• If the channel is busy, wait until it becomes free.
3 Press the PTT switch and speak into the microphone in
your normal speaking voice.
• For best sound quality at the receiving station, hold the
microphone approximately 1.5 inches (3 ~ 4 cm) from your
mouth.
4 Release the PTT switch to receive.
R
ECEIVING
1 Select your desired zone and channel using the selector
and the
Zone or Channel keys.
• Alternatively, you can turn the Scan function on if desired.
2 When you hear a caller’s voice, readjust the volume as
necessary.