22
6
7
1
5
Press the
PTT
switch within 5 seconds
to save the setting, otherwise the
operation will cancel.
A beep will sound and the transceiver
will announce the new Tone number.
Repeat steps 3 to 6 to set up another
channel.
Turn the transceiver power OFF and
then ON again to activate the new
settings.
Press the
Lock
key to increment the
Tone number or the
Scan
key to
decrement the number, to select the
new tone or code.
Tone numbers and their corresponding
tones/ codes are provided in the table
below.
Press and hold the
Lock
or
Scan
key to
increment/ decrement the Tone
number by 5 at a time.
A voice announcement will inform you of
the currently selected Tone number.
Note:
The transceiver will automatically return to normal operation if
no action is performed for 5 seconds.
