Kenwood TK-2000, Руководство по обслуживанию

Страница: 6 / 40

TK-2000
6
DISASSEMBLY FOR REPAIR
1. Separating the Case Assembly from the
Chassis
1. Remove the two knobs (
a
).
2. Remove the two screws ( b ).
3. Expand the right and left sides of the bottom of the case
assembly, Iift the chassis, and remove it from the case
assembly (
c
).
4. Taking care not to cut the speaker lead ( d ), open the
chassis and case assembly.
Note:
Solder the speaker wire back in its original position if you
have removed it.
d
–
+
BRN
GRN
2. Removing the TX-RX unit from the
Chassis
1. Remove the packing ( e ).
2. Remove the 13 screws (
f
).
3. Remove the packing ( g ) and two hexagon nuts ( h ).
4. Remove the solder from the antenna terminal using a
soldering iron then lift the unit off ( i ).
Note:
When reassembling the unit in the chassis, be sure to
solder the antenna terminal.
3. Removing the Rear Panel
1. Raise the rear panel on the chassis (
j
).
a
a
b
b
c
j
Antenna terminal
e
f
g
h
i
h