Kenwood SB250 series, Инструкции и идеи для рецептов

Страница: 6 / 138

2 Screw the goblet onto the blade
unit.
3 Screw the tap assembly onto the
goblet. Check that the dispensing
tap lever is in the off position
.
4 Place the assembled goblet on the
power unit.
5 Place the liquid ingredients into the
goblet.
●
This includes fruit (not frozen), fresh
yoghurt, milk and fruit juices. These
can be placed into the goblet to the
level marked LIQUIDS for either 2 or
4 servings.
6 Add ice or frozen ingredients to the
goblet.
●
This includes frozen fruit, frozen
yoghurt, ice cream or ice. These can
be added
up to the level marked
FROZEN INGREDIENTS for the
corresponding number of servings.
7 Screw the lid onto the goblet.
8 Either put the cap into the lid, then
turn. Or place the stirrer in the hole.
●
The stirrer can be used when
blending thick mixtures or when
large quantities of frozen items are
used.
9 Press the MIX button for up to 30
seconds, this is to start the mixing
process, then press the SMOOTH
button. Allow the ingredients to
blend until smooth.
●
Use the stirrer by moving it in an anti
clockwise direction.
10 Place a glass under the tap, press
the MIX button and press down on
the dispensing tap lever.
●
Thinner drinks may dispense without
having to switch on the power unit.
●
Use the stirrer to assist when
dispensing thick smoothie drinks.
●
To help dispense the last amount of
a thick smoothie drink, add a few
tablespoons of liquid to increase the
flow.
11 When the glass is full, switch off and
release the lever.
OR
Switch off, remove the goblet and
pour the drink.
hints
●
To make a thinner smoothie drink
add more liquid.
●
To make a thicker smoothie drink
add more frozen ingredients but do
not exceed the frozen limit marked
on the goblet.
●
Before fitting the lid, push the solid
ingredients into the liquid using the
stirrer.
●
Use the PULSE button to operate
the power unit in a start stop action
to control the texture of your drink.
Take care as this automatically
selects the higher speed and may
cause the drink to be thrown up the
sides and onto the lid of the goblet.
●
After blending, some drinks may not
be completely smooth due to seeds
or the fibrous nature of ingredients.
●
Some drinks may separate on
standing, therefore it’s best to drink
them straight away. Separated
drinks should be stirred before
drinking.
important
●
Never blend dry ingredients (eg
spices, nuts) or run the Smoothie
Blender empty.
●
Don’t use the blender as a storage
container. Keep it empty before and
after use.
●
Some liquids increase in volume and
froth during blending eg milk, so do
not overfill and ensure the lid is
correctly fitted.
●
To ensure long life of your Smoothie
Blender, never run it continuously for
longer than 60 seconds.
●
Never blend food that has formed a
solid mass during freezing, break it
up before adding to the goblet.
cleaning
●
Always switch off, unplug and
dismantle before cleaning.
●
Never let the power unit, cord or
plug get wet.
●
Empty the goblet before unscrewing
it from the blade unit.
3