background image

R-SG7/DP-SG7/X-SG7 (EN)

49

Preparation section

Basic 

section

Application section

Knowledge section

Important Items

Important Items

Handling of discs and tapes

DIGITAL AUDIO

DIGITAL AUDIO

COMPACT

COMPACT

Label side

Playing side

Cleaning

If fingerprints or foreign matter be-
come attached to the disc, lightly
wipe the disc with a soft cotton cloth
(or similar) from the center of the disc
outwards in a radial manner.

Storage

When a disc is not to be played for
a long period of time, remove it from
the player and store it in its case.

Handling

Hold the discs so that you do not
touch the playing surface.

Discs which can be played with this unit

CD (12 cm, 8 cm), and the audio part of CDV, CD-G and CD-
EXTRA.
Use discs that comply with the IEC standard, for example
a disc carrying the             marking on the label surface.

Disc handling precautions

Disc accessories

The disc accessories (stabilizer, protection sheet, protec-
tion ring, etc.) which are marketed for improving the sound
quality or protecting discs as well as the disc cleaner should
not be used with this system because they may cause
malfunction.

Do not attach paper or tape to ei-
ther the playing side or the label side
of the discs.

Sticker

Sticky paste

Never play a cracked or warped disc

During playback, the disc rotates at high speed in the player.
Therefore, to avoid danger, never use a cracked or deformed
disc or a disc repaired with tape or adhesive agent.
Please do not use discs which are not round because they
may cause a malfunction.

2. Endless tapes

Do not use an endless tape, as this could damage the
mechanism of the unit.

To re-record

Safety tab (accidental erasure prevention tab)

After an important recording has been finished, break the
safety tab, to prevent the recorded contents from being
erased or recorded on accidentally.

When there is slack in the tape

In such a case, insert a pencil into the reel hole and wind
the reel hub to remove the slack.

To store cassette tapes

Do not store the tapes in a place which is subject to di-
rect sunlight, or near equipment that generates heat. Keep
the cassette tapes away from any magnetic field.

For A side

For B side

Notes on cassette tape

Apply tape only to the position
where the tab has been removed.

1.Longer tape than 100 minutes cassette tape

Since longer tape than 100 minutes cassette
tape is very thin, the tape could adhere to the
pinch roller or be easily cut. It is recommended
that these tapes not be used with this unit to
prevent possible damage.

Notes

Notes

Notes

N

S

Содержание R-SG7

























































Отзывы: