Kenwood PS-33, Инструкция по эксплуатации

Страница: 2 / 10

Thank you for purchasing this new DC Power Supply. This unit has been carefully engineered and
manufactured to rigid quality standards, and should give you satisfactory and dependable operation for many
years.
This Instruction Manual covers the following model versions:
U.S.A. and Canada,
Europe and Oceania,
U.K.,
and General Markets
The following explicit definitions apply in this Instruction Manual.
WARNING : Risk of fire or electric shock may occur. DO NOT DISREGARD!
CAUTION : Equipment damage may occur, but not personal injury.
NOTE : If disregarded, inconvenience only, no risk of equipment damage or personal injury.
IMPORTANT
1. Please read this Instruction Manual carefully before placing your DC Power Supply in service.
2. Save this Instruction Manual.
NOTE
The first time this equipment is used, a faint odor may be given off by the power transformer. This is merely
the filler in the power transformer or the wax on the capacitors evaporating as the unit warms up. This is
normal and is not a defect.
For United Kingdom
Always remove the mains plug from the wall outlet prior to any
maintenance of this equipment.
WARNING: THIS EQUIPMENT MUST B E EARTHED.
IMPORTANT:
This plug contains a 13 ampere fuse. Should the fuse need to be
replaced, ensure that the replacement fuse has a current rating
of 13 amperes. Use only fuses stamped with an ASTA or BSI
approval mark on the body of the fuse.
If the moulded plug is incompatible with the outlets in your home,
remove the fuse, then cut off and discard the plug. There is danger
of severe electrical shock should the cut off plug be inserted into
a live outlet. If a new plug is fitted, observe the wiring code as
shown below. If in doubt, consult a qualified electrician.
The wires in the mains lead of this product are coloured in
accordance with the following code:
Green and Yellow: Earth
Blue : Neutral
Brown : Live
As wire colours in the mains lead of this equipment may not
correspond with the coloured markings identifying the terminals
in your plug, proceed as follows:
Wire colour Plug terminal marking
Green and Yellow E or or Green or Green and
Yellow
Blue N or Black
Brown L or Red
Green and Yellow
to Earth
IF IN DOUBT-CONSULT A COMPETENT ELECTRICIAN.
Brown to
Live
Blue to
Neutral
Plug-
2