24
6
7
5
1
Press the
PTT
switch within 5 seconds
to save the setting, otherwise the
operation will cancel.
A beep will sound.
Repeat steps 4 to 6 to set up another
channel.
Turn the transceiver power OFF and
then ON again to activate the new
settings.
Press the
Call
key to increment the
Tone number or the
Monitor
key to
decrement the number, to select the
new tone or code.
Tone numbers and their corresponding
tones/ codes are provided in the table
on page 25.
Press and hold the
Call
or
Monitor
key
to increment/ decrement the Tone
number by 5 at a time.
A voice announcement will inform you of
the currently selected Tone number.
Note:
The transceiver will automatically return to normal operation if
no action is performed for 5 seconds.
