Kenwood NX-3220 E, Руководство по обслуживанию

Страница: 11 / 204

(No.RA053<Rev.001>)1-11
2.2.8.2 Data Writing
Before moving to next Zone/Channel, “Keep This Change?”
appears on the LCD, if you select “OK”, the new data is written
to memory. If you select “Cancel”, the new data not be written;
the new data will be erased.
•
The setup items for Front panel programming mode are as
follows.
*4: In "Channel Type" display, "Transmit Mode" can be
entered only when Mixed mode is selected.
• Button operation
No. Setup item Display Remarks
1 RX Frequency RX Frequency Receive Frequency
2 TX Frequency TX Frequency Transmit Frequency
3 Channel Type Channel Type Analog/NXDN/DMR
4 Transmit Mode*4 Transmit Mode Analog/NXDN/DMR
5 Channel
Spacing
Channel Space Analog:
12.5kHz/20kHz/25kHz
Note: 20kHz is applied
for E, E2 and E3 types
only.
NXDN:
6.25kHz/12.5kHz
DMR: 12.5kHz
6 RX Signaling RX QT/DQT Receive QT/DQT
7 TX Signaling TX QT/DQT Transmit QT/DQT
8 RX RAN RX RAN None, 1~63
9 TX RAN TX RAN None, 1~63
10 Color Code Color Code 0 ~15
11 Slot Selection Slot Selection Slot 1, Slot 2
12 Transmit Power Transmit Power Low/Medium/High
13 Channel Name
Channel Name
No. Setup item Display Remarks
Button\
Item
Zone
Select
Channel
Select
RX
Frequency
TX
Frequency
Channel Type Transmit Mode *7 Channel
Spacing
[ ] Decision Decision Decision Decision Decision Decision Decision
[ ] Unused Back to the
previous item Back to the
previous item Back to the
previous item Back to the
previous item Back to the
previous
item Back to the
previous item
[ ] Unused Unused Go to the TX
Frequency Go to the RX
Frequency Unused Unused Unused
[ ] Exit panel
program mode Exit panel
program mode Exit panel
program mode Exit panel
program mode Exit panel program
mode Exit panel program
mode Exit panel
program mode
[

] Zone change Channel
change
Fresuency up Fresuency up Channel type
change
Transmit Mode
Change Channel Spacing
Change
[

] Zone change Channel
change
Frequency
down Frequency
down Channel type
change Transmit Mode
Change Channel Spacing
Change
[

] Unused Unused Frequency
step change Frequency
step change Unused Unused Unused
[

] Unused Unused Frequency
step change Frequency
step change Unused Unused Unused
Keypad
[0] ~ [9]
*5 Zone number
select Channel
number select Go to the direct enter mode Channel number
select (1,2 or 3) Transmit Mode
number select
(1 or 2) Channel spacing
select *6
Keypad
[*] *5 Decision Decision Decision Decision Decision Decision Decision
Keypad
[#] *5 Unused Back to the
previous item Back to the
previous item Back to the
previous item Back to the
previous item Back to the
previous item Back to the
previous item