Kenwood NEXEDGE NX-900, Инструкция по эксплуатации

Страница: 26 / 39

9
■
Receiving
The icon will flash and a calling ID or text message will appear when a
Status call is received.
Press any key to return to normal operation.
■
Reviewing Messages in the Stack Memory
1
Press the key programmed as
Stack
, or press and hold the key
programmed as
Selcall
,
Status
, or
S Status
to enter Stack mode.
• The last received message is displayed with the message number.
2
Press the / keys to select the desired message.
• Message types are identified as follows:
I: Caller ID
S: Status Message
M: Short Message
• You can change the displayed information by pressing and holding the key
for second. The display cycles as follows:
ID Name > Status/Short Message > CH/GID > Time Stamp > ID Name ...
3
Press the key to return to normal operation.
• To delete the selected message, press the key or microphone # key. To
confirm the deletion, press the key or microphone key.
• To delete all messages, press and hold the key or microphone
#
key for
second. To confirm the deletion, press the key or microphone key.
S
horT
m
eSSAgeS
To send a short message, you must connect the transceiver to a PC. Ask your
dealer for details.
• Short messages can contain a maximum of 48 characters.
• Received short messages are displayed the same as Status messages and are
stored in the same stack memory. A combined maximum of 5 Status calls and short
messages can be stored in the stack memory.
l
ong
m
eSSAgeS
To send and receive long messages, you must connect the transceiver to a PC.
Ask your dealer for details.
• Long messages can contain a maximum of 4096 characters.
gpS r
eporT
To send your location data, you must first connect a GPS unit to the transceiver.
GPS data can be manually transmitted by pressing the key programmed as
Send
the GPS data
, or by accessing the Send the GPS data function through the Menu
{page 2}. If set up by your dealer, GPS data may be automatically transmitted at a
preset time interval.