Kenwood NEXEDGE NX-57 Series Скачать руководство пользователя страница 22

Страница: 22 / 26

RadioPro IP Gateway

Installation and Configuration Guide NEXEDGE NX-57xx/58xx

3.3 Configure the RadioPro IP Gateway

Note: Before continuing, ensure that Wi-Fi connection has been disabled in the PC or Laptop being used to
configure the IP Gateway.

The RadioPro ICU (

onfiguration

tility) must be used to configure each RadioPro IP Gateway with the necessary

parameters. Configuration of each RadioPro IP Gateway must be performed before connecting the IP Gateway to a
local area network.

Configure RadioPro IP Gateway settings:

Please Refer to the

RadioPro IP Gateway Installation Guide

for information about how to connect to the IP

Gateway and for settings that apply to all radio systems.

Configure NEXEDGE specific settings: (Once connected to the IP Gateway with the ICU Utility)

NEXEDGE Radio tab

Enter the appropriate radio ID values for the fields
on this tab.

The

Receive PTT ID timeout (ms)

field is used

to give the transmitting radio time to transmit its
PTT ID before the default PTT ID is used.

GPS tab

If mapping locations of subscribers is required,
place a check mark next to

Start GPS polling

when online status received

. Leave this

unchecked if GPS mapping is not needed, or if
subscriber radios have been programmed to start
GPS polling on their own.

Then choose a

Report interval time

to set the

minimum time between successive GPS updates.
Increasing this parameter will decrease the number
of GPS updates, thereby allowing more channel
bandwidth for voice conversations.

Refer to the

RadioPro IP Gateway Installation Guide

for instructions on how to connect the RadioPro IP

Gateway to an IP Network, configure Port Forwarding, and installing RadioPro Clients.

Содержание NEXEDGE NX-57 Series



























Результаты поиска

Содержание NEXEDGE NX-57 Series

Отзывы:

Похожие инструкции для NEXEDGE NX-57 Series

Бренды по названию

Популярные бренды

Kenwood NEXEDGE NX-57 Series, Руководство по установке

Результаты поиска

Содержание NEXEDGE NX-57 Series

Отзывы:

Похожие инструкции для NEXEDGE NX-57 Series

Бренды по названию

Популярные бренды