Kenwood MP642U - Radio / CD Скачать руководство пользователя страница 54

Страница: 54 / 60

KDC-X993/ KDC-HD942U/ KDC-X693/ KDC-MP642U

Troubleshooting Guide

Some functions of this unit may be disabled by
some settings made on this unit.

• Cannot set up the subwoofer.

• No output from the subwoofer.

• Cannot set up the subwoofer position of Manual

position setting.

▲

• <Subwoofer output> of <Basic Operation> (page 4)

is not set to On.

• The Dual zone function is enabled.

☞

<Audio

Setup> (page 28)

• Cannot set up the subwoofer phase.

▲

The Low Pass Filter is set to Through.

☞

<X’Over

setting> (page 30)

• Cannot select the output destination of the

subsource in the Dual zone.

• Cannot adjust the volume of the rear speakers.

▲

The Dual zone function is disabled.

☞

<Audio

Setup> (page 28)

• Cannot register a security code.

• Cannot set up Display.

▲

<Demonstration mode Setting> (page 27) is not

turned off.

What might seem to be a malfunction in your unit
may just be the result of slight misoperation or
miswiring. Before calling service, first check the
following table for possible problems.

General

The Touch Sensor Tone does not sound.

✔

The preout jack is being used.

☞

The Touch Sensor Tone cannot be output from

the preout jack.

Tuner source

Radio reception is poor.

✔

The car antenna is not extended.

☞

Pull the antenna out all the way.

Disc source

The specified disc does not play, but another one

plays instead.

✔

The specified CD is quite dirty.

☞

Clean the CD, referring to the CD cleaning of the

section on <Handling CDs> (page 3).

✔

The disc is loaded in a different slot from that

specified.

☞

Eject the disc magazine and check the number

for the specified disc.

✔

The disc is severely scratched.

☞

Try another disc instead.

Audio file source

The sound skips when an Audio file is being

played.

✔

The media is scratched or dirty.

☞

Clean the media, referring to the CD cleaning of
the section on <Handling CDs> (page 3).

✔

The recording condition is bad.

☞

Record the media again or use another media.

B64-4416-00̲00̲09FLIP̲K̲en.indd 54

09.1.7 3:54:12 PM

Содержание MP642U - Radio / CD





























































Результаты поиска

Содержание MP642U - Radio / CD

Отзывы:

Похожие инструкции для MP642U - Radio / CD

Бренды по названию

Популярные бренды

Kenwood MP642U - Radio / CD, Инструкция по эксплуатации

Результаты поиска

Содержание MP642U - Radio / CD

Отзывы:

Похожие инструкции для MP642U - Radio / CD

Бренды по названию

Популярные бренды