48
EN
7
Execution
6
Press the ON/STANDBY
key
(or
POWER key on the remote
control) to put the unit in the
STANDBY mode.
The STANDBY/TIMER indicator lights
in green.
When the set ON time comes, the
timer program is executed and record-
ing starts.
To cancel program timer :
Perform steps
2
to
4
and select “TIMER
OFF” of “Program timer” (page 45) until
“PROG.” is not lit.
To check or change the timer setting :
Restart the procedure from step
1
again.
÷
Be sure to adjust the time of the day (page
7) before using the timer functions.
÷
The speakers’ output will decrease during
timer recording.
÷
Even when the program timer is canceled,
previously made setting is stored in memory
and remains until new timer information is
set the next time.
÷
When the STANDBY/TIMER indicator is blink-
ing in green, the timer setting or clock set-
ting is erroneous. Check and correct them
as required (pages 7 & 47 to 48).
4
Press the VOLUME/MULTI CON-
TROL keys to select “TUNER” or
“AUX”, then press the SET/TUN-
ING MODE key.
“TUNER”: Radio
“AUX”
: AUX input source
5
To record a radio station, press
the VOLUME/MULTI CONTROL
keys to select preset station to
be recorded, then press the SET/
TUNING MODE key.
*5052/43-49/EN
5/29/01, 10:40 AM
48