Expanded DAB+ information
With DAB+, supplemental information is transmitted in addition to the music signal. This can be retrieved as follows.
Press the
INFO
button on the remote control to retrieve successively the following information:
•
DLS (Dynamic Label Segment):
Text information accompanying the programme, such as performer, song title,
album name etc.
“NO DLS”
is shown for stations which do not support DLS.
•
Signal level:
This is shown from left to right in the display using symbols.
The more symbols that are shown, the better is the reception.
•
PTY (Programme Type):
This indicated the classification of stations according to categories, e.g.Pop, News,
Religion, Info, Classics, etc.
• Ensemble name, e.g. DR Deutschland
• Display of channel and frequency of the station assigned
•
ERR XX:
This information shows the error rate of the digital reception. This is also dependent on the signal level
and can also be used for orienting the antenna.
•
XX K BPS:
Display of station data rate, e.g. 80 kBit/s. The data rate can differ from station to station.
•
DABPLUS:
Indicates the “DAB+” receiving mode.
• Current time
• Current date
DAB+ menu functions
The
MENU
button opens a menu in which different DAB+ functions can be set. You can scroll through the
menu using the
TUN+
or
TUN-
buttons. The following functions can be set:
•
FULL SCAN:
Repeated automatic station scan. Confirm the function using the
Enter
button.
•
MANUAL:
With this you can set a specific receiving channel.Using the
Enter
button, the function is confirmed
and the display will show the station which is currently set with the corresponding frequency.
• Press the
TUN+
or
TUN-
buttons to manually select another channel.
• Confirm selection using the
Enter
button. Then the signal level will be shown in the display, another
press of the button will load the current ensemble.
•
DRC (Dynamic Range Control):
With this you can adjust the dynamic range, provided that this is supported
by the selected station. The available settings are
“OFF”
,
“LOW”
and
“HIGH”
. The selection is made with
the
TUN+
or
TUN-
buttons and confirmed with the
Enter
button.
•
PRUNE:
Invalid stations are deleted from the stations list with this. Select with the
Enter
buttons, Y/N
with
TUN+
or
TUN-
and confirm with
Enter
.
• SYSTEM: For customer service only!
Use of the FM radio
Press the
DAB
button on the remote control or the
4.5 mm
27.0 mm
5.
8 m
m
4.
3 m
m
button on the main device until
“FM”
appears on
the display.
Setting a FM station
• Press the
TUN+
button on the remote control to increase the reception frequency.
• Press the
TUN-
button on the remote control to lower the reception frequency.
• If you hold down the
TUN+
or
TUN-
buttons, an automatic station scan starts which stops at the
first station which is found.
• Press the
Auto Tune
button to start a station scan with automatic storage of the
stations which are found. A maximum of 20 stations will be stored in the order they were found.
• Press the or
buttons on the remote control or on the main device to scroll through the
memory list. Memory spaces which are unassigned will be indicated with
“EMPTY“
.
14
