Kenwood LZH-70W - LCD Monitor - External, Инструкция по эксплуатации

Страница: 5 / 44

Remote control functions
Installing Batteries in the
Remote Control
1. Remove the battery cover as shown above.
2. Install two AAA batteries with their poles as shown above.
3. Replace the battery cover.
CAUTION:
Do not leave the remote control in direct sunlight, such as on the
dashboard.
NOTE:
The supplied batteries are for operational checks, and may not
last as long as regular alkaline batteries.
When the remote-controllable distance becomes reduced,
replace both batteries with new ones.
Basic Console Operation
Turning the console on and off
1. Slide the screen release button away from the screen to
unlock the screen.
2. Pivot the screen downward until a comfortable viewing angle
is reached. The internal friction detent will hold the screen in
position while the console is in use.
3. Press the POWER button on the console or the remote to turn
it on and off. When the console is on, internal backlighting will
illuminate the controls.
• After the unit has been turned on and is displaying a picture,
adjust the viewing angle and Dimmer control to optimise the
picture quality.
• Pivot the screen to the locked position when not in use. The
power will automatically turn off.
Console dome lights
The LZH-70W’s dome lights are controlled by the 3-position slid-
ing switch. Sliding the switch to the ON position will turn the
lights on. The AUTO position will allow the lights to turn on and
off with the vehicle’s interior lighting, and the OFF position will
prevent the lights from turning on at all times.
• Do not leave the vehicle unattended with the dome light
switch in the ON position, as this could discharge the vehicle’s
battery.
Connecting an auxiliary audio/video source
Make sure the console’s power is OFF before making any connections
The Auxiliary A/V
Input lets you con-
nect optional A/V
equipment, such
as a camcorder or
video game. The
connectors can be
accessed by remov-
ing their protective plastic cover located behind the screen hinge.
Use RCA cables to connect the audio and video signals to their
respective jacks. Mono audio sources will require the use of an
RCA Y-cable to connect to both right and left inputs.
LZH-70W Instruction Manual
5
Power button: Press to turn the
console on and off.
Mute button:
Press to temporarily
mute the sound to the wired head-
phones; press again to restore the
sound.
Source buttons:
Press to access the
Video 1, Video 2 and Aux inputs.
Menu button:
Activates the screen
adjustment modes.
Volume control buttons:
Controls vol-
ume to the wired headphone jacks
and wired A/V output connections.
(Note: The KPH-IR70 wireless head-
phones have built-in volume controls
for use with the LZH-70W.)
• When the MENU button is pressed,
use the volume buttons to perform
the various adjustments.
Dimmer button: Press to reduce the
LCD screen’s brightness for night-
time viewing; press again to restore
full brightness.
ENG_43024_LZH-70WUserManual.qxd 04.5.24 5:12 PM Page 5