LZ-702W
9
TEST MODE
●
How to enter the test mode
Press and hold the [SCRN] and [Volume_Up] keys and reset.
●
How to clear the test mode
Turn the power off and ACC Off, then reset to clear.
●
Remote controller
Set the switch to “TV” on the remote controller before using.
●
Screen transition
• Press the [MENU] key to display the screen below.
• Press each key on the Test Mode main screen and that will
go to each screen.
To the SYSTEM 1 screen (Same as normal mode)
To the TOUCH screen (Touch 4 positions to revise)
To the HSPOSI screen (Horizontal position adjustment)
To the Chroma Auto screen (
γ
-IC auto adjustment)
To the Chroma Func screen (TINT and Phase setup)
To the Chroma screen (COM DC setup)
To the Information screen (Version display)
●
Information screen
• Below is the displayed contents on the information screen.
µ
-com Version
ROM Correction Version
●
TOUCH screen
• After Touch Position Adjustment, save the memory into the
E2PROM.
• Enter 4 items and write onto the E2PROM.
• E2PROM normal write or abnormal result will display on
the screen.
Volume Up
SCRN
●
HPOSI screen
• After Screen Position Adjustment, save the memory into
the E2PROM.
Adjust in the following order. OSD
→
VIDEO
→
NAVI
• E2PROM normal write or abnormal result will display on
the screen.
●
Chroma Auto screen
• After the Auto Adjustment for Chroma, save the memory
into the E2PROM.
Auto Adjustment items: RGB_Amplitude
→
Bright
→
Ganma1
→
Ganma2
→
CONT_RGB2
→
SUB_Bright_R
→
SUB_Bright_B
→
COM_Amplitude
• E2PROM normal write or abnormal result will display on
the screen.
• While E2PROM normal write or abnormal result is being
displayed, touch below “Return” and cancel the Adjustment
Screen.
●
Chroma Func screen
• After the Chroma Adjustment, save the memory into the
E2PROM.
• Press [Next] key and change the setup items.
Press [/] key and change the setup values.
Press [Set] key to cancel or confirm the setup values.
Press [OK] key to write to E2PROM. Press [OK] key while
normal write or abnormal result is being displayed to cancel
the adjustment screen.
• It allows the setup operation using remote controller. (Refer
to the section for Custom code TV remote controller)
• Chroma IC Adjustment screen (Item setup)
→
Write to
E2PROM
Setup items: Tint adjustment
(00h-FFh)
Phase adjustment (00h-3Fh)
• E2PROM normal write or abnormal result will display on
the screen.
●
Chroma screen
• After the Chroma Adjustment, save the memory into the
E2PROM.
• Press [/] key and change the setup values.
Press [Set] key to cancel or confirm the setup values.
Press [OK] key to write to E2PROM. Press [OK] key while
normal write or abnormal result is being displayed to cancel
the adjustment screen.
• It allows the setup operation using remote controller. (Refer
to the section for Custom code TV remote controller)
Setup items: COM DC (00h-FFh)
• E2PROM normal write or abnormal result will display on
the screen.
Hposi
Chroma Auto
Chroma Func
Chroma
INFO
Touch Adjust
System SetUp
SET UP
Return
Test Mode SET UP screen
