Kenwood KTC-SR901 - Digital Satellite Tuner, Инструкция по эксплуатации

Страница: 5 / 13

Sets the seeking mode.
<A models>
Press the [AUTO] button.
Each time the button is pressed the Seek
mode switches as shown below.
Display Operation
"Channel" Normal manual seeking
control.
"Preset" Search in order of the
channels in the Preset
memory.
You cannot operate this unit during switching
Channel or Category.
<B models and C models>
Select Seek Mode in the MENU items of
Control unit to press the [
4
]or [
¢
] button.
Each time the button is pressed the Seek
mode switches as shown below.
Display Operation
"AUTO1" Press the [
¢
] button to
seek for channels up the
band
.
Press the [
4
] button to
seek for channels down
the band.
"AUTO2" Press the [
¢
] button to
move to the next preset
channel.
Press the [
4
] button to
move to the last preset
channel.
"MANUAL"
Press the [
¢
] button to
increase
Press the [
4
] button to
decrease.
<A models>
Press the [FM] button.
Each time the button is pressed the preset
band switches between the SR1,SR2,SR3 and
SR4.
<B models and C models>
Press the [FM] button.
Each time the button is pressed the preset
band switches between the SR1/Si1,SR2/Si2
and SR3/Si3.
Putting the channel in the memory.
<KDC-X859,KDC-X759,KDC-MP919>
1
Select the preset band
Press the [FM] button.
2
Enter Memory mode
Press the [#3] button for at least 1
second.
"Preset Memory" is displayed.
3
Select the channel to put in the
memory
Press the [
4
] or [
¢
] button.
4
Select the preset number
Press the [FM] or [AM] button.
5
Put the channel in the memory
Press the [#3] button for at least 2
seconds.
The preset number display blinks 1 time.
6
Repeating steps 3 to 5 and putting the
desired channel in the memory.
On each band, 1 channel can be put in the
memory on each [#1] — [#6].
7
Exit Memory mode
Press the [#3] button.
<Others>
1
Select the preset band
Press the [FM] button.
2
Select the channel to put in the
memory
Press the [
4
] or [
¢
] button.
3
Put the channel in the memory
Press the [#1] — [#6] button for at least
2 seconds.
The preset number display blinks 1 time.
On each band, 1 channel can be put in the
memory on each [#1] — [#6] button.
• Only the channel number is stored. Category
information is not stored.
• You can set up to 6 memories even on a
control unit with 8 preset buttons.
Channel Preset Memory
Selecting the Preset Band
Switching Seek Mode
English
- 5
Operations
KTC-SR901_r5 02.12.13 6:20 PM Page 5