Kenwood KS101G Series, Инструкция по эксплуатации

Страница: 16 / 40

16
Guard rail
Stop notch
ASSEMBLING AND DISMANTLING OF THE SIDE RUNNER FRAMES
−
Fit the side runner frames into the holes on the side walls inside the oven (fig. 4.1).
−
Slide the drip pan and rack into the runners as shown in fig. 4.2.
The rack must be fitted so that the safety catch, which stops it sliding out, faces the
inside of the oven.
−
To dismantle, operate in reverse order.
Fig. 4.2 Fig. 4.1
REPLACING THE OVEN LAMP
WARNING: Ensure the appliance is
switched off and disconnected from the
electrical power supply before replacing
the lamp to avoid the possibility of
electric shock.
• Let the oven cavity and the heating
elements to cool down.
• Switch off the electrical supply.
• Remove the protective cover “ A ” (fig.
4.3).
• Replace the halogen lamp “
C
”
with a new one suitable for high
temperatures (300°C) having the
following specifications: 220-240 V,
50/60Hz and same power (check watt
power as stamped in the lamp itself) of
the replaced lamp.
IMPORTANT WARNING: Never
replace the bulb with bare hands;
contamination from your fingers can
cause premature failure. Always use a
clean cloth or gloves.
• Refit the protective cover.
Note: Oven lamp replacement is not
covered by your guarantee.
Fig. 4.3
A
B
A
C
WRONG
CORRECT