Kenwood KS-308EX, Инструкция по эксплуатации

Страница: 5 / 24

5
EN
ENGLISH
KS-308EX 1220/02-06/EN
BROWN
BS
SURROUND
BACK
SPEAKERS (6-16
Ω
)
SUB WOOFER
PRE OUT
POWER
LINE INPUT
CROSSOVER FILTER
VOLUME
MIN
ON
OFF
MAX
CROSSOVER
60Hz 200Hz
STARDBY / ON
OFF
ON
1. Twist wire’s
conductor
4. Release
3. Insert the
conductor
2. Push
(–) (+) Red
Subwoofer (option)
(–) (+)
Gray
(–)
Blue
(+)
Right Left
Left
Right
Speaker terminals
(Amplifier or receiver)
(+) Green
(–)
White
(+)
Connections
The speaker wires and labels of speakers’ back panel are color-coded to facilitate connection. Connect each wire to the matching-
colored terminal, as shown in the figure.
Be sure to turn off your amplifier before connecting or disconnecting speakers.
Front speakers ➤
➤
1. The speaker system’s maximum input power is indicated in the specifications. To avoid speaker damage, never run the
speakers at power levels exceeding this limit.
2. This speaker system has a nominal impedance of 8 ohms. To ensure safe and reliable operation, be sure that your
amplifier or receiver is able to work with 8-ohm speakers.
• Never short the (+) and (–) speaker wires together.
• Do not reverse L and R or (+) and (–) connections. Reversal of sides or polarities may result in unnatural, incorrectly positioned
sound.
Surround
speakers
Brown
(+)
Wire with white line
Surround back
speaker
(–)
Center speaker
(–)