
(No.RA021<Rev.001>)1-3
SECTION 1
PRECAUTION
This service manual does not describe PRECAUTION.
SECTION 2
SPECIFIC SERVICE INSTRUCTIONS
2.1
INSTALLATION
2.1.1 Installing the Remote Kit (KRK-14H, KRK-15B)
The KRK-14H and KRK-15B remote kit is used to remotely oper-
ate the NX-5700/5800 series transceiver.
The KRK-14H is connected to the NX-5700/5800 or KCH-19 op-
eration panel with the KCT-71 remote control cable.
The KRK-15B is connected to the NX-5700/5800 RF Deck with
the KCT-71.
Note:
The KRK-14H has the common firmware of the NX-5700/
5800.
When turning the transceiver power ON in the state from which
the firmware version of the NX-5700/5800 RF Deck and KRK-
14H is different, the firmware programming mode will start up
automatically, and “FIRMWARE PROG” is displayed on the
LCD.
In this case, rewrite the newer version firmware.
The firmware is written into the NX-5700/5800 RF Deck and
KRK-14H at the same time.
2.1.2 Connection image
2.1.3 DIP Switch setting
All DIP switches for single remote (KRK-14H and KRK-15B)
must be set as “ON”.
2.1.4 Remove the Operation panel from the transceiver
(NX-5700, NX-5800 only)
(1) Lift the two tabs of the panel on the bottom of the transceiv-
er with a flat-head screwdriver and remove the panel from
the chassis. (Fig. 1)
Fig.1
(2) Remove the flat cable from the display unit connector
(CN6) of the panel.
(3) Remove the cable from the display unit connector (CN2) of
the panel.
2.1.5 Install the KRK-15B onto the NX-5700, NX-5800 RF
Deck
(1) Insert the cable into the interface unit (XC3-0090-20) con-
nector (CN2) of the KRK-15B.
(2) Insert the flat cable into the interface unit connector (CN1)
of the KRK-15B. (Fig. 2)
Fig.2
Note:
The blue line of the flat cable and the flap of connector
are as same side.
After inserting, the flat cable should be locked with the
connector (flap) surely.
NX-5700/5800
RF Deck
KCT-71
Remote Control Cable
KRK-15B
KRK-14H
NX-5700/5800
KCH-19
Operation Panel
KRK-14H
1 2 3 4
ON
KRK-15B
1 2 3 4
ON
KRK-15B
CN1
CN2
RF Deck
Содержание KRK-14H
Страница 22: ...MEMO ...
Страница 32: ... No RA021 Rev 001 VSE Printed in Japan JVC KENWOOD Corporation Communications Systems BU ...