18
EN
ENGLISH
Listening to a source component
Normal playback
Preparing for playback
Some preparatory steps are needed before starting playback.
Turning on this model
1
Turn on the power to the related components.
2
Turn on the power to this model by pressing POWER ON/OFF
and ON/STANDBY key.
Selecting the input mode
If you have selected a component connected to the
CD/DVD, VIDEO2,
DVD/6CH
jacks, make sure that the input mode setting is correct for the
type of audio signal to be used.
7
Selecting MD/TAPE
Select the source name corresponding to the component connected to
the MD/TAPE jacks. The initial factory setting is
“TAPE”
. To change the
source to
“MD”
, follow the steps below:
1
Use the INPUT SELECTOR knob to select “TAPE”.
2
Hold down the AUTO key for more than 2 seconds.
• The source indication changes to
“MD”
.
• To return to the original indication, repeat procedure
2
.
Setting the speaker status
Press the SPEAKERS ON/OFF key to switch the speaker on or off.
AUTO
INPUT SELECTOR
POWER
ON/OFF
SPEAKERS
ON/OFF
ON/STANDBY
4
¢
+
+
+
INPUT SELECTOR
VOLUME CONTROL
Input
Selector
VOL
The speaker indicator lights up.
1
Use the INPUT SELECTOR knob or keys to select the source
you want to listen to.
The input sources change as shown below:
1
“TUNER”
2
“CD/DVD”
3
“TAPE” or “MD”
4
“VIDEO1”
5
“VIDEO2”
6
“DVD/6CH”
7
“PHONO”
2
Start playback from the selected source.
3
Use the VOLUME CONTROL knob or VOL +/– keys to adjust
the volume.
*5440/15-23/1EN
04.1.27, 8:22 PM
18
