background image

English   

23

Ambience effects

Surround modes

This unit is equipped with listen modes that allow you to enjoy an 
enhanced sonic ambience with a variety of video sources.
In order to obtain the optimum effect from the surround modes, 
make sure to input the proper speaker settings beforehand.
See <Speaker settings> 

^

.

The below speaker placements are for 5.1 channel 
surround sound system which are;

• Dolby 

Digital

•  Dolby Pro Logic II
• DTS
• DSP 

mode

• DVD 

6-channel

 

SR

SL

C

L

R

SW

TV / SCREEN

L :  

Front Left speaker 

SW :  Subwoofer
C : 

Center speaker

R :  

Front Right speaker

LS : 

Surround Left speaker

RS : 

Surround Right speaker

Manufactured under license from Dolby Laboratories. Dolby, 
Pro Logic, and the double-D symbol are trademarks of Dolby 
Laboratories. 

Manufactured under license under U.S. Patent #’s: 5,451,942; 
5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and 
worldwide patents issued & pending. DTS and DTS Digital 
Surround are registered trademarks and the DTS logos and 
Symbol are trademarks of DTS, Inc. © 1996-2007 DTS, Inc. All 
Rights Reserved.

Dolby Digital 

Dolby Digital is a highly sophisticated and versatile audio 
encoding/decoding technology. Dolby Digital technology can 
transmit mono, stereo (two-channel), or up to 5.1-channel 
surround sound (discrete* multichannel audio).
In 5.1-channel surround sound, the three front channels 
(Left/Center/Right) deliver crisp, clean dialogue and accurate 
placement of on-screen sounds, while twin surround channels 
(Left Surround/Right Surround) wrap around the audience and 
immerse them in the action. The LFE (Low-Frequency Effects) 
channel delivers real impact for explosions and other effects that 
can, literally, be felt as well as heard.
The superior coding efficiency of Dolby Digital-and its ability 
to deliver high-quality discrete multichannel audio without 
compromising video quality has made it the designated audio 
standard for DVD worldwide.
*  The sound information contained in each of the six available 

channels is distinct and independent. These six channels 
are described as a "5.1-channel" system, because there are 
five full-bandwidth channels with 3 Hz to 20 kHz frequency 
range for Front Left and Right, Center, and Surround, plus one 
"Low Frequency Effects" (LFE) subwoofer channel devoted to 
frequencies from 3 to 120 Hz.

Dolby Pro Logic II 

Dolby® Pro Logic® II technology processes any high quality stereo 
(two-channel) movie and music audio into five playback channels 
of full-bandwidth surround sound. A matrix surround decoding 
technology, Dolby Pro Logic II detects the directional cues that 
occur naturally in stereo content and uses these elements to 
create a five-channel surround sound playback experience.
Dolby Pro Logic II is fully compatible with all Dolby Pro Logic 
technologies. It provides optimal audio for playback in a 5.1-
channel home theater system for the thousands of videocassettes 
and TV programs encoded in four-channel Dolby Surround (the 
encoding counterpart to Dolby Pro Logic's decoding technology). 
(Dolby Pro Logic II surround Movie mode) 
Dolby Pro Logic II also enables video game consoles to encode 
five-channel surround sound information into a stereo signal 
with virtually no impact on the console's CPU, which means all 
this extra audio won't slow your game down. (Dolby Pro Logic II 
surround Game mode)
Dolby Pro Logic II can bring new life to your CD collection. Play 
your music through your home theater system, and you'll hear 
seamless, natural sound with new depth and detail. It's almost 
like hearing a newly remastered CD. (Dolby Pro Logic II surround 
Music mode)

B60-5738-00̲00.indd   23

B60-5738-00̲00.indd   23

08.4.23   11:39:16 AM

08.4.23   11:39:16 AM

Содержание KRF-V5300D









































Отзывы: