Kenwood KRF-V4530D, Руководство по обслуживанию

Страница: 2 / 37

This manual is divided into four sections, Preparations, Operations,
Other, and Remote Control.
Remote Control (Separate booklet) (VR-407/VR-406/KRF-
V7030D/KRF-V6030D only)
Includes the “Quick Start Guide,” which shows you how to operate other
components using the remote control, as well as a detailed explanation
of all remote control operations. Once you have registered your compo-
nents with the proper setup codes, you’ll be able to operate both this
receiver and your other AV components (TV, VCR, DVD player, LD pla-
yer, CD player, etc.) using the remote control supplied with this receiver.
The manual covers the VR-407, VR-406, VR-405, VR-414, KRF-
V7030D, KRF-V6030D, KRF-V5030D, and KRF-V4530D. Items such
as functions, number of jacks, and remote control details differ some-
what between these models. To confirm the functions available on the
model you have purchased, refer to the table below.
Model name
Remote
Terminal
Control
Speaker out VIDEO 3 jacks Front input
VR-407 RC-R0609 2 systems Equipped Equipped
KRF-V7030D (A, B)
VR-406 RC-R0609 2 systems Not equipped Not equipped
KRF-V6030D (A, B)
VR-405/414 RC-R0509 1 system Not equipped Not equipped
KRF-V5030D/
V4530D
Memory back up function
Please note that the following items will be deleted from the unit's
memory if the power cord is disconnected from the AC outlet for
approximately 3 days.
• Power mode.
• Input selector settings.
• Device preset.
• Picture output.
• Speaker ON/OFF
• Volume level.
• BASS, TREBLE, INPUT level.
• Subwoofer ON/OFF.
• Dimmer level.
• Monitor ON/OFF.
• MD/TAPE settings.
• 6CH/2CH input setting.
• Listen mode setting.
• Speaker settings.
• Input mode setting.
• Midnight mode setting.
• Broadcast band.
• Frequency setting.
• Preset stations.
• Tuning mode.
VIDEO 2/MONITOR jacks (for VR-406/405/414/KRF-
V6030D/V5030D/V4530D)
The receiver’s VIDEO 2/MONITOR jacks can be used in two different
ways. Make the appropriate setting for the component connected to
the jack when the receiver is turned on.
Use as a VIDEO 2 jack
You can connect a video deck or the like to these jacks and perform
video playback and recording. The initial factory setting is “VIDEO 2”.
Use as a MONITOR jack
You can connect a cassette deck or the like to these jacks and make
use of the deck’s monitoring function during recording. Alternately,
you can connect a graphic equalizer to these jacks to apply compen-
sation to the music signal.
To use the VIDEO 2/MONITOR jacks as MONITOR jacks, hold down
the MONITOR key of the main unit for more two seconds so that the
indication shown below appears.
• At the same time the setting is switched to “MONITOR,” the audio
input source switches to tuner and the video input source switches
to VIDEO 1.
• To switch the setting back to “VIDEO 2,” once again hold down the
MONITOR key for two seconds or more.
TUNED
AUTO FM
MHz
AM
kHz
PRO LOGIC
3
DOWN MIX
DIGITAL
S.DIRECT
DSP
AUTO SOUND
LFE
C
S RS LS
TI.VOL B
CLIP MUTE
RDS EON PTY
TP TA NEWS
STEREO ST.
MEMO
SW
R L
SP A
MONITOR
MONITOR
Resetting the Microcomputer
If the microcomputer may malfunction (unit cannot be operated,
or shows an erroneous display) if the power cord is unplugged
while the power is ON, or due to some other external factor. If this
happens, execute the following procedure to reset the micro-
computer and return the unit to its normal operating condition.
Unplug the power cord from the wall outlet, then plug it
back in while holding down the POWER key.
• Please note that resetting the microcomputer will clear the contents
of the memory and returns the unit to the state it was in when it left
the factory.
With the power cord plugged in, turn the POWER key
OFF. Then, while holding down the ON/STANDBY key,
press POWER.
For U.S.A. and Canada
For other countries
MODEL ABB POWER SUPPLY POWER AMP PREAMP DISPLAY
KRF-V4530D E4 - X07-3142-71 X08-3010-11 X14-7122-72
KRF-V5030D E1
-
X07-3142-71 X08-3010-11 X14-7122-72
KRF-V5030D T5 - X07-3140-51 X08-3010-11 X14-7122-72
KRF-V5030D Y5 X00-3000-20 X07-3142-91 X08-3010-11 X14-7120-22
KRF-V5030D-S E3 - X07-3142-71 X08-3010-11 X14-7122-72
KRF-V5030D-S I5 X00-3000-20 X07-3140-21 X08-3010-11 X14-7120-22
KRF-V5030D-S M5 X00-3000-20 X07-3140-21 X08-3010-21 X14-7120-22
KRF-V5030D-S X5 - X07-3140-71 X08-3010-11 X14-7120-72
KRF-V5030DE E2 - X07-3142-71 X08-3010-11 X14-7122-72
VR-405 K5 - X07-3140-10 X08-3010-10 X14-7120-11
VR-405 P5 - X07-3140-10 X08-3010-10 X14-7120-11
VR-414 K4 - X07-3140-11 X08-3010-10 X14-7120-11
VR-414 P4
-
X07-3140-11 X08-3010-10 X14-7120-11
KRF-V6030D E6 - X07-3132-72 X08-3010-10 X14-7122-71
KRF-V6030D-S I6 X00-3000-20 X07-3130-22 X08-3010-10 X14-7120-21
KRF-V6030D-S M6 X00-3000-20 X07-3130-22 X08-3010-21 X14-7120-21
KRF-V6030D-S X6 - X07-3130-72 X08-3010-10 X14-7120-71
KRF-V6030DE E7 - X07-3132-72 X08-3010-10 X14-7122-71
VR-406 K6 - X07-3130-11 X08-3010-10 X14-7120-10
VR-406 P6 - X07-3130-11 X08-3010-10 X14-7120-10
Model vs PCB
KRF-V4530D/V5030D/V6030D/VR-405/406/414
2
CONTENTS / ACCESSORIES /CAUTIONS
CONTENTS / ACCESSORIES / CAUTIONS ............. 2
CONTORLS ................................................................3
BLOCK DIAGRAM ......................................................5
CIRCUIT DESCRIPTION ............................................6
ADJUSTMENT ............................................................8 PC BOARD .............................................................. 10
SCHEMATIC DIAGRAM .......................................... 17
EXPLODED VIEW ....................................................33
PARTS LIST..............................................................34
SPECIFICATIONS ....................................................46
Contents
Cautions
FM indoor antenna (1)
(T90-0836-05)
For VR-406 and KRF-V6030D For VR-405, VR-414, KRF-V5030D, and KRF-V4530D
Remote control unit (1)
(A70-1330-05): RC-R0609
(A70-1331-05): RC-R0610(E type) Batteries (R6/AA) (2)
Remote control unit (1)
(A70-1328-05): RC-R0509
(A70-1329-05): RC-R0510(E,T type)
*AC plug adaptor (1)
(E03-0115-05)
*Use to adapt the plug on the power
cord to the shape of the wall outlet.
(Accessory only for regions where
use is necessary.)
Batteries (R6/AA) (2)
AM loop antenna (1)
(T90-0852-05)
Battery cover (A09-1178-08) Battery cover (A09-1178-08)
Accessories
Copy from
instruction
manual.
www. xiaoyu163. com
QQ 376315150
9 9
2
8 9
4 2
9 8
TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3
Q Q
TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299