KRF-A4020 (En/E2T)
Operations
Preparations
Other
13
Listening to radio broadcasts
Tuning (non-RDS) radio stations
Radio stations can be classified into RDS (Radio Data System)
stations and other stations. To listen to or store RDS stations
in the preset memory, see the section entitled,
“Using RDS”
.
Frequency display
1
Use the input selector (INPUT SELECTOR) to select
the tuner.
2
Use the BAND key to select the desired broadcast
band.
Each press switches the band as follows:
3
Use the AUTO key to select the desired tuning
method.
Each press switches the tuning method as follows:
• Normally, set to
“AUTO”
(auto tuning). If the radio
waves are weak and there is a lot of interference, switch
to manual tuning. (With manual tuning, stereo broad-
casts will be received in monaural.)
4
Use the MULTI CONTROL to select the station.
Auto tuning
:The next station is tuned automatically.
Manual tuning
:Turn the knob (press the key) to select
the desired station.
• You can also use the
TUNING
key on the remote control
to make the selection.
Lights when a broadcast is being received in stereo.
Using RDS (Radio Data System)
RDS is a system that transmits useful information (in the form
of digital data) for FM broadcasts along with the broadcast
signal. Tuners and receivers designed for RDS reception can
extract the information from the broadcast signal for use with
various functions, such as automatic display of the station
name.
RDS functions:
PTY (Program TYpe identification) Search
^
Automatically tunes to a station that is currently broad-
casting the specified program type (genre).
EON (Enhanced Other Network) reservation
^
Sets the tuner to automatically switch to stations broad-
casting one of two types of programs, even though you are
listening to another station. The tuner returns to the
original station when the broadcast of the selected pro-
gram ends.
PS (Program Service name) Display
Automatically displays the station name transmitted by
the RDS station.
RDS Auto Memory function
$
Automatically selects and stores up to 30 RDS stations in
the preset memory.
If fewer than 30 RDS stations have been stored in the
preset memory, regular FM stations will be stored in the
remaining places.
Radio Text function
Displays the radio text data transmitted by some RDS
stations when you press the
DISPLAY
key. There is no
display if no text data was transmitted.
TI volume
&
If you preset the volume level, you can listen to the
information of your choice at that volume level automati-
cally. After the information has been received, the volume
returns to the previous level.
The
”RDS“
indicator lights up when an RDS broadcast (signal)
is received.
Note:
Some functions and function names may differ for cer-
tain countries and areas.
Before using a function utilizing the RDS, be sure to
perform the RDS Auto Memory operation by referring to
the description in
“Presetting RDS stations (RDS AUTO
MEMORY)”
.
$
SP.
A B
FM
AM
STEREO
AUTO
) )
.
MHz
STEREO
TUNED
AUTO
SP.
- - 8 9 ) )
.
MHz
A B
FM
STEREO
TUNED
AUTO
SP.
TP
B B C 1 F M
MHz
kHz
A B MUTE
EON FM
AM
S.DIRECT
TAPE 2 / MONI
“FM“
or
“AM”
indicator
1
FM
2
AM
1
AUTO lit
(auto tuning)
2
AUTO not lit
(manual tuning)
”TUNED“
is
displayed when
a station is
received
MULTI CONTROL
MULTI CONTROL
VOLUME UP, DOWN
INPUT SELECTOR
AUTO
BAND
MEMORY
1~0, +10
BAND
AUTO
VOLUME CONTROL
PTY
DISPLAY
TA/NEWS
4
P.CALL
¢
PTY
DISPLAY
TA/NEWS
DIMMER
