— 37 —
— 37 —
Accessory
2
Removal tool
Screw (M4X8)
(commercially
available)
■
Removing the Unit
4
Lower the removal tool
toward the bottom, and
pull out the unit halfway
while pressing towards the
inside.
Be careful to avoid injury from
the catch pins on the removal
tool.
5
Pull the unit all the way out
with your hands, being
careful not to drop it.
1
Refer to the section <Removing the hard rubber frame> and
then remove the hard rubber frame.
2
Remove the screw (M4
×
8) on the back panel.
3
Insert the two removal tools deeply into the slots on each
side, as shown.
■
Removing the hard rubber frame
2
When the upper level is removed, remove the lower two
locations.
The frame can be removed from the bottom side in the same manner.
Catch
Lock
1
Engage the catch pins on the removal tool and remove the
two locks on the upper level.
Upper the frame and pull it forward as shown in the figure.
Accessory
2
Removal tool
KRC-766(M)_U.S_r2 02.11.11 7:51 PM Page 37
Содержание KRC-666
Страница 42: ...KRC 766 M Eng r3 Page 42 ...