manualshive.com logo in svg

Kenwood KRC-35R, Инструкция по эксплуатации

Поделиться
Скачать
Kenwood KRC-35R Скачать руководство пользователя страница 33

— 33 —

Troubleshooting Guide

SOLUTION

POSSIBLE CAUSE

PROBLEM

The memory is erased when
the ignition is turned off.

The battery cable has not been connected to the proper
terminal.

Connect the cable correctly, referring to the section on
"Connecting Cables to Terminals".

The TEL mute function does
not work.

The TEL mute cable is not connected properly.

Connect the cable correctly, referring to the section on
"Connecting Cables to Terminals".

The TEL mute function turns
on even though the TEL mute
cable is not connected.

The TEL mute cable is touching a metal part of the car.

Pull the TEL mute cable away from the metal part of the
car.

The ignition and battery cable are incorrectly connected.

Connect the cable correctly, referring to the section on
"Connecting Cables to Terminals".

Free switching of the sound
quality.

The system Q function is set on Scan mode.

Refer to the “System Q” page and switch it to a
function other than Scan mode. (see page 6).

Can’t remove tape.

The cause is that more than 10 minutes has elapsed
since the vehicle switch was turned OFF.

The tape can only be removed within 10 minutes of the
ACC switch being turned OFF. If more than 10 minutes
has elapsed, turn the ACC switch ON again and press
the Eject button. 

Содержание KRC-35R





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды