6
Set the controls and switches as follows.
BALANCE : center position
BASS : center position
LOUD : OFF
DOLBY NR : OFF
FADER : center position
TREBLE : center position
ADJUSTMENT
No.
ITEM
TAPE
OUTPUT
SETTINGS
RECEIVER
SETTINGS
ALIGNMENT
POINTS
ALIGN FOR
CASSETTE DECK SECTION
[1]
HEAD
HEIGHT
SCC-1659
-
TAPE PLAY
Head Height
Screw
1) During FWD transport adjust (F) and (F’) so that
line A of 2-LINE TAPE passes trough the center of
the head shield plate (core center area)
2) During RVS transport adjust screws (R) and (R’)
so that line B of 2-LINE TAPE passes trough the
center of the head shield plate (core center area)
3) After the alignment above, reverse the trans-
port direction and check the FWD alignment again.
If it is deviated, perform alignment again. (Tape
used : SCC-1659, manufactured by A-BEX)
[2]
HEAD
AZIMUTH
TCC-153
10kHz
Connect a
AC voltmeter
to SP out.
TAPE PLAY
Head Azimuth
Screw
Adjust the azimuth for each Lch/Rch or FWD/RVS
becomes maximum
HEIGHT
F
(FWD)
HEIGHT
TAPE SPEED
(RVS)
HEIGHT/AZIMUTH
(FWD)
HEIGHT/AZIMUTH
(RVS)
F
R
R
(2-LINE TAPE)
(FWD)
(RVS)
B
A
B
A
KRC-108S/188
