2(No.RQ070)
3. Drawing External Appearance
Weigh
t
Model weight
（
kg
）
KPG-36X 0.08
4. About selecting USB/UART
For using USB (Up to 12Mb/s USB Speed), Slide the SW of KPG-36X to USB.
For using UART (RS-232C), Slide the SW of KPG-36X to UART.
5. PC tuning
Connect the wires to the PCB in the connector case of KPG-36X.
For output the wires out of the connector case, need to process the connector case.
・
Connect AF Voltmeter to 2pin and 3pin of the connector PCB.
・
Remove the 5pin wire from the connector PCB.
・
Connect Audio generator to the 5pin of the connector PCB.
・
Connect Audio generator to the 6pin of the connector PCB.
・
Connect the 4pin to the GND.
(Refer to below figure)
Slide the SW of KPG-36X to UART for PC tuning.
Remove the screw
.
Connector case
UART/USB
SW
1500
(645)
(800)
30±
10
