ENGLISH
5
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
[TUNER SETTING]
[PRESET TYPE]
[NORMAL]
: Memorizes one station for each preset button in each band
(FM1/FM2/FM3/AM). ;
[MIX]
: Memorizes one station for each preset
button, regardless of the selected band.
[SYSTEM]
[KEY BEEP]
(Applicable only if
[X’OVER]
is set to
[2WAY]
.)
[ON]
: Activates the keypress tone. ;
[OFF]
: Deactivates.
[TDF ALARM]
(Applicable only if
[X’OVER]
is set to
[2WAY]
.)
[ON]
: Activates the alarm if you forget to detach the faceplate when ACC is
set to OFF. ;
[OFF]
: Deactivates.
[SOURCE SELECT]
[BT AUDIO SRC]
[ON]
: Enables BT AUDIO in source selection. ;
[OFF]
: Disables. (Page 16)
[BUILT-IN AUX]
[ON]
: Enables AUX in source selection. ;
[OFF]
: Disables. (Page 10)
[F/W UPDATE]
[UPDATE SYSTEM]
[F/W UP xxxx]
[YES]
: Starts upgrading the firmware. ;
[NO]
: Cancels (upgrading is not
activated).
For details on how to update the firmware, visit
<https://www.kenwood.com/cs/ce/>.
• Once you have upgraded the firmware, you are unable to downgrade
the firmware.
[FACTORY RESET]
[YES]
: Resets the settings to default (except the stored station). ;
[NO]
: Cancels.
Getting Started
Change the crossover type
1
Press
B
SRC repeatedly to enter STANDBY.
2
Press and hold number buttons 4 and 5 to enter crossover select.
The current crossover type appears.
3
Turn the volume knob to select “2WAY” or “3WAY”, then press the
knob.
4
Turn the volume knob to select “YES” or “NO”, then press the knob.
The selected crossover type appears.
• To cancel, press and hold
.
• To adjust the selected crossover settings, see page 19.
Once you have changed the crossover type, the next time when you turn on
the power, the display shows:
“2-WAY X ’ OVER” or “3-WAY X ’ OVER” “PRESS” “VOLUME KNOB”
“TO CONFIRM”
Press the volume knob to acknowledge in order to proceed to the next
desired operation.
CAUTION
Select a crossover type according to how the speakers are connected.
(Page 25, 26)
If you select a wrong type:
• The speakers may damage.
• The output sound level may be extremely high or low.
KMR-M408BT_X_B5A-4090-00_EN_1st Draft.indd 5
KMR-M408BT_X_B5A-4090-00_EN_1st Draft.indd 5
11/25/2021 11:39:21 AM
11/25/2021 11:39:21 AM
