ENGLISH
31
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
References
Change the display information
Each time you press DISP, the display information changes.
• If the information is unavailable or not recorded, “NO TEXT”, “NO INFO”, or other information
(eg. station name) appears or display will be blank.
Main display
Source name
Display information: Main display
STANDBY
Source name/Clock Clock back to the beginning
DIGITAL AUDIO
Source name/Clock Service label Ensemble label Dynamic label
Song title/Artist Next program Signal level Clock back to the
beginning
RADIO
Source name/Clock Frequency Clock back to the beginning
FM Radio Data System stations only:
Source name/Clock Station name/Program type Radio text
Radio text+ Radio text+ song title/Radio text+ artist Frequency
Clock back to the beginning
USB
For MP3/WMA/WAV/FLAC files:
Source name/Clock Song title/Artist Album title/Artist Folder
name File name Playing time Clock back to the beginning
BT AUDIO
Source name/Clock Song title/Artist Album title/Artist Playing
time Clock back to the beginning
AUX
Source name/Clock Clock back to the beginning
Troubleshooting
Symptom
Remedy
General
Sound cannot be heard.
• Adjust the volume to the optimum level.
• Check the cords and connections.
“MISWIRING CHECK WIRING
THEN PWR ON” appears.
Turn the power off, then check to be sure the terminals of
the speaker wires are insulated properly. Turn the power
on again.
“PROTECTING SEND SERVICE”
appears.
Send the unit to the nearest service center.
Source cannot be selected.
Check the
[SOURCE SELECT]
setting. (Page 5)
• Sound cannot be heard.
• The unit does not turn on.
• Information shown on the
display is incorrect.
Clean the connectors. (Page 30)
The unit does not work at all.
Reset the unit. (Page 3)
Correct characters are not
displayed.
• This unit can only display uppercase letters, numbers,
and a limited number of symbols.
• Depending on the display language you have selected
(page 6), some characters may not be displayed
correctly.
Digital Radio
DAB reception is poor.
Make sure
[ON]
is selected for
[DAB ANT POWER]
.
(Page 5)
“DAB ANT ERR”
Check the DAB antenna. If a passive antenna (without
a booster) is used, set
[DAB ANT POWER]
to
[OFF]
.
(Page 5)
“RELATED SERV FOUND”
• Press the volume knob to activate Soft-Link. (Page 8)
• Press
to cancel.
KMM-BT408DAB_E_B5A-3856-00_EN_1st Draft.indd 31
KMM-BT408DAB_E_B5A-3856-00_EN_1st Draft.indd 31
9/8/2021 4:28:12 PM
9/8/2021 4:28:12 PM
