12
ENGLISH
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
BLUETOOTH — Connection
Supported Bluetooth profiles
– Hands-Free Profile (HFP)
– Advanced Audio Distribution Profile (A2DP)
– Audio/Video Remote Control Profile (AVRCP)
– Serial Port Profile (SPP)
– Phonebook Access Profile (PBAP)
Supported Bluetooth codecs
– Sub Band Codec (SBC)
– Advanced Audio Coding (AAC)
Connect the microphone
BLUETOOTH®
(for
/
)
Adjust the
microphone angle
Secure using cord clamps (not
supplied) if necessary.
Microphone
input jack
Microphone
(supplied)
Rear panel
Pair and connect a Bluetooth device for the first time
1
Press
to turn on the unit.
2
Search and select this unit model name (KMM-BT3
**
/KMM-BT2
**
) on the Bluetooth
device.
“PAIRING” “PASS XXXXXX” Device name “PRESS” “VOLUME KNOB” appears on
the display.
• For some Bluetooth devices, you may need to enter the Personal Identification
Number (PIN) code immediately after searching.
3
Press the volume knob to start pairing.
“PAIRING OK” appears when pairing is completed.
Once pairing is completed, Bluetooth connection is established automatically.
•
: “BT1” and/or “BT2” indicator on the faceplate lights up.
•
: “BT1” and/or “BT2” on the display window lights up.
• This unit supports Secure Simple Pairing (SSP).
• Up to five devices can be registered (paired) in total.
• Once the pairing is completed, the Bluetooth device will remain registered in the unit
even if you reset the unit. To delete the paired device,
16, [DEVICE DELETE]
.
• A maximum of two Bluetooth phones and one Bluetooth audio device can be connected
at any time.
However, while in BT AUDIO source, you can connect to five Bluetooth audio devices and
switch between these five devices.
( 17)
• Some Bluetooth devices may not automatically connect to the unit after pairing. Connect
the device to the unit manually.
• Refer to the instruction manual of the Bluetooth device for more information.
*
For the location of the microphone input jack, refer to page 29.
JS_KWD_KMM_BT304_ENE2N_EN_3.indd 12
JS_KWD_KMM_BT304_ENE2N_EN_3.indd 12
8/7/2017 9:48:26 AM
8/7/2017 9:48:26 AM
