![Kenwood KMM-303BT Скачать руководство пользователя страница 18](http://html.mh-extra.com/html/kenwood/kmm-303bt/kmm-303bt_instruction-manual_1955949018.webp)
16
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
TROUBLESHOOTING
Symptom
Remedy
General
Sound cannot be heard.
•
Adjust the volume to the optimum level.
•
Check the cords and connections.
“MISWIRING CHECK WIRING THEN PWR
ON” appears.
Turn the power off, then check to be sure the terminals of the speaker wires are
insulated properly. Turn the power on again.
“PROTECTING SEND SERVICE” appears.
Send the unit to the nearest service center.
•
Sound cannot be heard.
•
The unit does not turn on.
•
Information shown on the display is
incorrect.
Clean the connectors. (
2
)
The unit does not work at all.
Reset the unit. (
3
)
Radio
•
Radio reception is poor.
•
Static noise while listening to the radio.
•
Connect the antenna firmly.
•
Pull the antenna out all the way.
USB / iPod
“READING” keeps flashing.
Do not use too many hierarchical levels or folders.
Elapsed playing time is not correct.
This is caused by how the files are recorded.
Correct characters are not displayed (e.g.
album name).
This unit can only display uppercase letters, numbers, and a limited number of
symbols. Uppercase Cyrillic letters can also be displayed if [
РУССКИЙ
] is selected.
(
4
)
“NA FILE”
Make sure the media contains supported audio files. (
15
)
“READ ERROR”
Copy the files and folders onto the USB device again. If this does not solve the
problem, reset the USB device or use another USB device.
“NO DEVICE”
Connect a USB device, and change the source to USB again.
“COPY PRO”
A copy-protected file is played.
“NA DEVICE”
Connect a supported USB device, and check the connections.
“NO MUSIC”
Connect a USB device that contains playable audio files.
“iPod ERROR”
•
Reconnect the iPod.
•
Reset the iPod.
About Android device
•
This unit supports Android OS 4.1 and above.
•
Some Android devices (with OS 4.1 and above) may
not fully support Android Open Accessory (AOA) 2.0.
•
If the Android device supports both mass storage class
device and AOA 2.0, this unit always playback via AOA
2.0 as priority.
•
For more information and the latest compatible list,
see: www.kenwood.com/cs/ce/
About Bluetooth
•
Depending on the Bluetooth version of the device,
some Bluetooth devices may not be able to connect to
this unit.
•
This unit may not work with some Bluetooth devices.
•
Signal conditions vary, depending on the
surroundings.
•
For more information about Bluetooth, visit the
following website: www.kenwood.com/cs/ce/
MORE INFORMATION
JS_KWD_KMM_BT35_EN_EN_1.indd 16
JS_KWD_KMM_BT35_EN_EN_1.indd 16
18/8/2014 2:42:08 PM
18/8/2014 2:42:08 PM