E
nglis
h
— 30 —
The follow ing messages are displayed w hen certain problems are occurring in your system. Take the
recommended actions.
Nothing has been recorded on the M D.
BLANK
No disc magazine has been loaded in the changer. The disc magazine is not completely loaded.
]
Load the disc magazine properly.
No CD in the unit.
]
Insert the CD.
EJECT
No disc has been loaded in the disc magazine.
]
Load a disc into the disc magazine.
The CD is quite dirty. The CD is upside-dow n. The CD is scratched a lot.
]
Clean the CD and load it correctly.
E-04
No tracks are recorded on the M D, although it has a title.
NO TRACK
The unit is malfunctioning for some reason.
]
Press the reset button on the unit. If the "E- 77" code does not disappear, consult your nearest service center.
E-77
The protective circuit in the unit activates w hen the temperature inside the automatic disc changer exceeds 60°C (140°F),
stopping all operation.
]
Cool dow n the unit by opening the w indow s or turning on the air conditioner. As the temperature falls below 60°C (140°F),
the disc w ill start playing again.
HOLD
No disc has been loaded in the disc magazine.
]
Load a disc into the disc magazine.
NO DISC
Something is w rong w ith the disc magazine. or the unit is malfunctioning for some reason.
]
Check the disc magazine. And then press the reset button on the unit. If the "E- 99" code does not disappear, consult your
nearest service center.
E-99
The M D player section is not operating properly.
]
Reinsert the M D. If the M D cannot be ejected or the display continues to flash even w hen the M D has been properly
reinserted, please sw itch off the pow er and consult your nearest service center.
The faceplate of the slave unit being connected to this unit has been removed.
]
Replace it.
NO PANEL
Troubleshoot ing Guide
IN
Содержание KMD-44
Страница 32: ......
