Kenwood KID60B14, Руководство по установке

Страница: 31 / 40

31
cleaning after use
external care
the door and the door seal
• Clean the door seals regularly with a soft damp cloth to remove food deposits.
• When the dishwasher is being loaded, food and drink residues may drip onto the sides of the
dishwasher door. These surfaces are outside the wash cabinet and are not accessed by water
from the spray arms. Any deposits should be wiped off before the door is closed.
the control panel
If cleaning is required, the control panel should be wiped with a soft damp cloth ONLY.
• To avoid penetration of water into the door lock and electrical components, do not use a
spray cleaner of any kind.
• Never use abrasive cleaners or scouring pads on the outer surfaces because they may
scratch the finish. Some paper towels may also scratch or leave marks on the surface.
half load
In case you do not have enough dishes for a full load, the half load option can be selected. Three
types of wash cycles can be selected: lower basket, upper basket and both baskets. This will help
save hot water and electricity. To use these functions, please follow the steps below.
1. Open the dishwasher door and load your soiled dishes and crockery onto the basket.
2. Press the ON/OFF button to turn on the dishwasher.
3. Select your preferred programme.
4. Press the alt button, the half load indicator will light up.
If you have dishes only in the upper basket, press the alt button repeatedly until the upper
indicator is lit. Only dishes on the upper basket will be washed. Make sure there are no
dishes in the lower basket while using this feature.
If you have dishes only in the lower basket, press the alt button repeatedly until the lower
indicator is lit. Only dishes on the lower basket will be washed. Make sure that there are
no dishes in the upper basket while using this feature.
5. Close the door and the unit will start the programme.