![Kenwood KID45S16 Скачать руководство пользователя страница 29](http://html.mh-extra.com/html/kenwood/kid45s16/kid45s16_installation-instructions-manual_190073029.webp)
29
Particles of food can get stuck in the spray arm jets
and block them. They should be checked and cleaned
regularly.
1. Ensure the dishwasher is switched off.
2. Check the holes in the upper and lower spray arms
for clogging. If there is any clogging, remove the spray
arms and clean them under running water.
3. The lower spray arm can be removed by pulling
it upwards, while the upper spray arm nut can be
removed by turning the nut anticlockwise.
4. Be sure that the nut is perfectly tightened when
refitting the upper spray arm.
filtering system
The filtering system in the base of the wash cabinet retains
coarse debris from the washing cycle. The collected coarse
debris may cause the filters to clog. Check the condition of the
filters regularly and clean them if necessary under running water.
Follow the steps below to clean the filters in the wash cabinet.
1. Ensure the dishwasher is switched off.
2. Turn the coarse filter anti-clockwise and gently lift it out.
3. Gently lift the metal filter and pull out.
4. Rinse all the filters under running water, including the filter
cylinder, and then refit all filters in the reverse order.
5. Carefully refit the main filter.
6. Gently turn the coarse filter in clockwise direction
until the arrows align and it clicks into place.
spray arms
• Do not over tighten the filters.
• Put the filters back in sequence securely,
otherwise coarse debris could get into the system
and cause a blockage.
• NEVER
use the dishwasher without the filters
in place. Improper replacement of the filters may
reduce the performance level of the appliance
and damage dishes and utensils.
* All images are for reference only; please refer to your individual unit for actual item.
KID60S15_IB_.indd 29
01/04/2015 16:14