28
switching off the unit
To save energy, remember to switch the dishwasher off using the
ON/OFF
button. The dishwasher
will continue to use electricity until it is switched off with the
ON/OFF
button.
If the dishwasher is not going to be used for a long period of time, e.g. whilst on holiday, disconnect
the unit from the mains supply.
unloading the dishwasher
Allowing dishes to cool down before unloading is important as dishes tend to break and chip more
easily when they are hot. Therefore, if you open the dishwasher door fully after switching off, it will
allow the dishes to cool down much faster.
We suggest:
Unload the lower basket first, followed by the cutlery basket and then the upper basket.
This will prevent water drops from the upper basket from falling onto the dishes in the lower basket.
delay start
The starting time of a washing programme can be delayed and adjusted. Please follow the steps
below.
1. Open the dishwasher door and load your soiled dishes and crockery.
2. Press the
ON/OFF
button to turn on the dishwasher.
3. Select your preferred programme.
4. Press the
Delay / Start
button.
5. Set the required delay start time using the
Delay / Start
button.
6. Close the door and the unit will start the programme at the assigned time automatically.
half load
In case you do not have enough dishes for a full load, the half load option can be selected for
washing. This will save hot water and electricity usage. Please follow the steps below.
1. Open the dishwasher door and load your soiled dishes and crockery.
2. Close the dishwasher door and then press the
ON/OFF
button to turn on the dishwasher.
3. Select your preferred programme.
4. Press the
1/2
button.
5. The unit will start the programme shortly.
Each press of this button increases the delay start time by 1 hour increments.
Содержание KDW45S13
Страница 1: ...Slimline Dishwasher KDW45S13 installation instructions manual ...
Страница 2: ......
Страница 35: ......